Do you have other rails? Please get in touch with us.



PUSHrack E-Scooter Rack
Variant Guide: Rail type
Rail Type:
A: L-Track

- Compatible with our own L-Track and most other airline rails on the market
B: Thule / Fiamma

- Suitable for Thule or Fiamma rails


Pre-order phase:
- We are currently in the pre-order phase!
- Please note that the design shown may still change slightly
- We will deliver the products from the beginning of April
Your Choice
This extension of the modular PUSHrack system helps you to realize your individual outdoor adventures without compromising on the transport of your equipment!
And this is how it works: Fold down the handlebars of your e-scooter and hook it into the PUSHrack with the rear axle - the hook-in point is part of every e-scooter. Fasten the straps and you're ready to go! A lock protects your equipment from theft.

All Requirements
Suitable Vehicles
- Citröen Jumper
- Fiat Ducato
- Ford Transit
- MAN TGE
- Mercedes Sprinter
- Nissan Interstar
- Nissan NV400
- Opel Movano
- Peugeot Boxer
- Ram ProMaster
- Renault Master
- VW Crafter
Vans from a height of 2.25 metres are perfectly suitable, but motorhomes, off-road vehicles and caravans are also possible.
Smaller vehicles such as a VW van (Multivan, California, Transporter) or Opel Vivaro are unfortunately not (yet) suitable.
Do you have a different vehicle? Please get in touch with us!

Assembly Requirements

- You will need two horizontal rails on your van for installation.
- With a distance of 100-130cm, adult bikes of all sizes fit on your PUSHrack.
- To prevent the bikes from rolling on the road later, the top rail should be mounted at least 150cm above the bumper.
You choose:
Thule / Fiamma Rails

Have you already installed another bike rack (e.g. Thule or Fiamma) with these rails? Perfect, then you can convert it or continue to use the mounting rails. You find the description here.
Airline Rails
You can also mount our Airline Rail Kit. It consists of high-quality, anodised rails and stainless steel mounting material to fit your vehicle perfectly.
Have you installed other rails on your vehicle or are you unsure? Please get in touch with us.

Not confident enough to install it yourself?


Will my e-scooter fit on the PUSHrack?

Requirements
- E-scooter maximum weight 25 kg
- 2x e-scooter carrier or max. 50 kg per vehicle door
- There must be a gap of at least 5mm next to the rear wheel (left or right)
We are constantly testing e-scooter models!
We have tested these models:
stæp ER1
One
Electric Scooter 4 Pro
Electric Scooter 4 Pro 2nd Generation
These models fit according to the manufacturer*:
Ey! 2
Ey! 3
Ey! 6
Pro
X+ (mounting via front axle possible)
1
1 PRO
2 CITY 480
2 START
2 XT 480
2 XT 600
2 XT 835
PULSE 480
PULSE 720
PULSE 960
Legacy
S5
S5-Z
KQi1 Pro
KQi2 Pro
KQi3 Pro
KQi3 Sport
KQi3 Max
KQi 300P
KQi 300X
KQi Air
KQi Air X
E2 E
E2 Plus E II
E2 PRO E
F2 E
F2 PRO E
F2 Plus E
MAX G2 E
SO ONE
SO ONE+
SO ONE PRO
Vega
R40 PRO
VX2 PRO
VX4
VX5
VX5 PRO
Electric Scooter 3
Electric Scooter 3 Lite
Electric Scooter 4
Electric Scooter 4 Ultra
Electric Scooter 4 Lite
Electric Scooter 4 Lite 2nd Generation
*We have checked these models as accurately as possible based on the data published online; a practical test is still pending.
Do you have another e-scooter? Please get in touch with us!
Have you bought an e-scooter carrier and tested it with one of the models listed here? Share a photo of the scooter on the carrier with us and receive a free PUSHrack BLOP bottle opener as a thank you!
Selection options for the order:
Rail Type:
A: L-Track

- Compatible with our own L-Track and most other airline rails on the market
B: Thule / Fiamma

- Suitable for Thule or Fiamma rails
Do you have other rails? Please get in touch with us.
Note on TÜV and StVO
Please check the regulations for cargo in the respective country before purchasing.
Note for journeys in Germany:
- If the load protrudes more than 1 m, a red flag is required according to StVO §22 paragraph 4.
- When transporting with PUSHrack products, the rear lights and the licence plate are generally not covered and are therefore compliant with §17 Paragraph 1 of the StVO. Should the rear lights or the licence plate nevertheless be covered, additional rear lights / licence plates are required.
What else is there?

Questions?
Weight | N/A |
---|---|
Material |
Aluminium, powder-coated |
Care Instruction |
For winter use, we recommend regular cleaning of road salt |
Origin |
Germany |
Included in the scope of delivery:
- 1x PUSHrack for one e-scooter
- 2x belts
- 1x screw set (suitable for the selected rail type)
- 1x off-road kit (for the transportation of full-suspension models)
- 1x instruction
Payment Methods

PayPal

Creditcard

Prepayment

Apple Pay

Google Pay
Shipping Cost & Delivery Time
Free delivery in Germany for orders over 100€!
Small products
Country | Cost | Tracking | Delivery time |
---|---|---|---|
Germany | 3-5 € | not included | 2-3 working days |
EU | 7 € | included | 4-7 working days |
Non EU | 6-10 € | included | 3-4 weeks |
Tall products
Country | Cost | Tracking | Delivery time |
---|---|---|---|
Germany | 8,30 - 20,00 € | included | 2-3 working days |
EU | 8,50 - 30,00 € | included | 3-7 working days |
Non EU | 20,00 - 50,00 € | included | 3-4 weeks |
Shipping costs vary depending on parcel size and country. The exact shipping costs are displayed during checkout before finalising the order.
Related products


PUSHrack Cross-Country Ski Rack
75,00 €
PUSHrack Ski Rack
75,00 €


PUSHrack Bottle Opener BLOP
29,00 € – 39,00 €

Reviews
There are no reviews yet.